+86-13826920939
Guangdong Yuanyao Test Equipment Co.,Ltd.
Guangdong Yuanyao Test Equipment Co.,Ltd.

Which Parts of Constant Temperature and Humidity Chamber Will Be Easily Damaged?

Customers are more concerned about constant temperature and humidity chamber consumables parts. When purchasing a constant temperature and humidity test chamber, users should consider future equipment, maintenance costs, consumables parts costs, and other things. As a result, many customers will ask which spare parts of constant temperature and humidity chamber are easily damaged. Although temperature humidity controlled chamber consumables are limited, they do exist, including wet cloths, heat pipes, humidification tubes, and other items.

 

Certain relative vulnerable spare parts in the constant temperature and humidity test chamber are the motors, heating tube, and humidification tube; another is to say that if the refrigeration unit in the cooler is not cleaned and maintained properly, the refrigeration compressor will jump high pressure or leak refrigerant, which are common failures.

 

1. Is it cost-effective to replace or repair these components of constant temperature and humidity chamber?

 

We believe that such charges are reasonable. The cost of replacing these parts is only 1% of the total cost of the equipment. Technology professional manufacturers do out of the equipment, such small problems are common, and the selection of constant temperature and humidity chamber equipment all the key electronic devices are imported well-known brands, coupled with more than ten years of work experience of professional and technical personnel assembly and commissioning, the relative rate of repair will be lower, so users do not need to worry too much about the product quality of the equip. Manufacturers provide free warranty and maintenance for one year, even if the product is not particularly good.

 

Furthermore, although these are wearing parts, but do not frequently fail. If the constant temperature and humidity chamber are used frequently, the heating tube and humidification tube will need to be replaced in about two years, the motor in about three years, and the replacement method is relatively simple. Replace once more can use about two or three years of time, and the replacement method is relatively simple. Guiding customers with telephone can also replace on their own.

 

2. Technical performance of the constant temperature and humidity chamber's sheet metal sections is critical

 

As a result of the numerous defective constant temperature and humidity environmental test equipment, the customer's long-term usage of deformation will increase, which will have a greater impact on the experimental results, as well as the actual operation of staff life safety.

 

The environment is the second factor that clients consider. Because the quality of the parts determines the level of damage to the equipment and performance, poor quality parts will cause damage to the equipment too quickly, and thus cause a variety of common failures equipment life, constant temperature and humidity chamber manufacturers in the production line equipment when the quality of commonly used spare parts. The level of damage and equipment performance determine the quality of the parts utilized in the production line.

Resources